Home > Unable To > Unable To Locate DLL - Physical Memory Dump - NT4.0

Unable To Locate DLL - Physical Memory Dump - NT4.0

If you cannot use the default COM port (COM 2) for debugging, use /Debugport=COMx where x is the COM port number. Windows NT Crash Dump AnalysisThe first section of output is Windows NT Crash Dump Analysis, which looks like the following: **************************************************************** ** ** Windows NT Crash Dump Analysis ** **************************************************************** * To configure Windows NT to save STOP information to a memory dump file 1.In Control Panel, double-click System. 2.In the System Properties dialog box, click the Startup/Shutdown tab. 3.Under Recovery, select Contact your system >administrator or technical support groupIt looks daunting, and I'd like to "solve" the problem without reinstalling Windows NT 4 Workstation.Any suggestions?As always, the help is appreciated...- Ryan RE: More about the author

To start viewing messages, select the forum that you want to visit from the selection below. On a RISC-based system, the boot options are configured from a firmware menu. Pending has been returned cmd flg cl Device File Completion-Context 0 0 0 00000000 00000000 00000000-00000000 Args: 00000000 00000000 00000000 00000000 0 0 0 00000000 00000000 00000000-00000000 Args: 00000000 00000000 00000000 The memory dump file Memory.dmp is in D:\Temp.

To configure the modem, you must be able to run Terminal.exe or some other communications program. PeteH2 (MIS) 2 Dec 02 11:03 I would also try rebuilding it with a plain SP6a NT installation, just in case it is software/config/virus based.HTHPete... Join Us! *Tek-Tips's functionality depends on members receiving e-mail. All executable files, drivers, dynamic-link libraries, and other program files in Windows NT are the free versions.

Stay logged in Sign up now! Several functions may not work. mrkev (MIS) 31 Jan 03 16:35 This error message usually is caused by a device driver problem or hardware incompatability. Check the integrity of the software hive by using the following procedure:WARNING: Using Registry Editor incorrectly can cause serious problems that may require you to reinstall your operating system.

For information on configuring the boot options for an x86-based system, see "Editing the Boot.ini File on a Target Machine," earlier in this chapter. FileSource ListplatformKd.exe*Alphakd.exeI386kd.exeMipskd.exePpckd.exeImagehlp.dll Kdextplatform.dll*Kdextalp.dllKdextx86.dllKdextmip.dllKdextppc.dll* platform matches the platform of the target computerFor instance, if your host computer is a 486 computer and the target computer is a MIPS RISC-based system, you copy the If any errors are found in the memory dump file, it reports them. more info here During boot-up, there is a point where you can hit the space bar to go to the last known good configuration, but that does not help.

If you have installed service packs or hot fixes to Windows NT, or if you are using any HAL (Hardware Abstraction Layer) other than the standard, single-processor HAL, you must construct This is the output if the Boot.ini file after it has been modified by steps 1-4: [boot loader] timeout=30 default=multi(0)disk(0)rdisk(0)partition(1)\WINDOWS [operating systems] multi(0)disk(0)rdisk(0)partition(1)\WINDOWS="Windows NT Version 4.0" /debug /debugport=com1 /baudrate=9600 multi(0)disk(0)rdisk(0)partition(1)\WINDOWS="Windows NT But occasionally I have updated drivers in NT and had problems. Please re-enable javascript to access full functionality. 0 Stop : C0000135(unable To Locate Dll) Started by ccnamcdba , Jan 19 2005 03:15 PM Please log in to reply 1 reply to

These new utilities simplify the process of dealing with kernel memory dump files and aid in sending memory dump files to support personnel for advanced analysis. Editing the Boot.ini File on the Target MachineTo configure a target system for a remote or local remote debugging, you edit the boot options in the Boot.ini file to tell Windows For more information, see "Setting up the Modem on the Target Machine," earlier in this chapter. Setting Up a Null-Modem ConnectionA modem is not used in a local debug session.

Do not confuse this with the file date of the driver, which can be set by external utilities. my review here Then perform the same procedure to uncheck Verify Windows NT system files and Inspect startup environment. You can find them on the Windows NT Server or Windows NT Workstation CD in the directory Support\Debug\platform, where platform is I386, Alpha, MIPS, or PowerPC. Table 39.1 describes directories that exist in a standard symbol tree.

When the code that causes a trap falls between the base address for a driver and the base address for the next driver in the list, then that driver is frequently They are in the Symbols directories on the CD under Support\Debug\platform, where platform is I386, Alpha, MIPS, or PowerPC. Click here to join today! http://gsdclb.org/unable-to/unable-to-locate-isafeif-dll.php The file is not a valid Registry file.After you have determined the problem, there are several ways to resolve it.

On RISC-based computers, rate is always 19200 bps._NT_SYMBOL_PATHPath to symbols directory_NT_LOG_FILE_OPENOptional, the name of the file to which to write a log of the debug sessionAfter these environment variables have been Sorry, an error occurred while loading the content. ⌂HomeMailSearchNewsSportsFinanceCelebrityWeatherAnswersFlickrMobileMore⋁PoliticsMoviesMusicTVGroupsStyleBeautyTechShoppingInstall the new Firefox» Yahoo Groups 👤 Sign in ✉ Mail ⚙ Help Account Info Help Suggestions Welcome to Yahoo Groups. When finished, restart your computer when Setup prompts you to do so.For additional information about how to repair your Windows NT installation, click the following article numbers to view the articles

The following table gives an example of how to configure a USRobotics modem for a remote debugging session.

It comes up to the blue screen and says "Unable to locate DLL - Beginning dump of physical memory." It refers to WINSRV, which I suppose is the DLL it can't ryhackl (Instructor) (OP) 21 Nov 02 17:25 Good day!A computer on our network receives this message (the blue screen of death) and we must restart the computer to continue:>STOP: (some data Symbol search path is: KD: waiting to connect... Kernel STOP Error, Blue Screen, or TrapWhen Windows NT encounters hardware problems, inconsistencies within data necessary for its operation, or other similar errors, the operating system processes the error based upon

Resource @ 0xffb6ed14 Shared 2 owning threads Threads: ffb3bb70-01 0012fb50: Unable to read ThreadCount for resource Resource @ 0xffb6ecdc Shared 2 owning threads Threads: ffb3bb70-02 0012fb50: Unable to read ThreadCount for Setting Up a Local Debugging Session on a Host ComputerYou need a local debug session for debugging in cases where a user-mode .dll or a device driver is causing server crashes. Register now while it's still free! http://gsdclb.org/unable-to/unable-to-locate-component.php Dumpflop does not require access to symbols.

It also references C0000135, which probably is the error code. You may notice that some of the entries listed do not include Windows NT 4.0 under the 'Products this article applies to' section. If you use this option, you can run the dump analysis utilities on any Windows NT-based computer after you load the memory dump file, including the computer on which the kernel This information is useful when a deadlock occurs on a system, because a deadlock is caused when one nonexecuting thread holds an exclusive lock on a resource needed by an executing

But you access that file in a different way. The information for the device drivers looks like this: **************************************************************** ** !drivers **************************************************************** Loaded System Driver Summary Base Code Size Data Size Driver Name Creation Time 80080000 f76c0 (989 kb) 1f100 Are you looking for the solution to your computer problem? When prompted, select S to specify additional drivers if your computer requires OEM drivers.5.

Newer Than: Search this thread only Search this forum only Display results as threads Useful Searches Recent Posts More... It also references C0000135, which probably is the error code. You edit the value of the OSLOADOPTIONS variable to control whether the RISC-based computer starts up in debug mode. These tables list the actual name of the .dll file as it exists on the product CD and the uncompressed size of the file in bytes.

Next, it describes setting up the computers for debugging. The free version of the executable file is smaller and runs at a normal speed, but cannot be debugged.