Thanks. I am unable to get it to detect the device. 0 LVL 16 Overall: Level 16 Routers 10 Message Accepted Solution by:kbbcnet kbbcnet earned 500 total points ID: 140640752005-05-23 Plug Thank you for contact us. I had a problem with a external box of LaCie (exact model is LaCie d2 Hard Drive Extreme 300Gb). news
I also noted that on the web interface, it showed my disk as mounted and formated as ext3, but it did not show any of the users I had created under After it completes, try unslinging again. Is there a list anywhere of disk that are compatible with unslinging? It would get detected by the slug if it was connected at power up.
I reformatted two of them to ext3 to improve performance (Music played via banshee accessing my 30 GB music library shared via nslu2 would stutter and break regularly; numerous people have I also ran into this with a Seagate FreeAgent 1TB drive, previously formatted as ext3 and containing some 500GB of data I had hoped to serve via FTP on my NSLU2 I suspect that this applies for more disks that don't have on/off switches. Several questionsarise:1) in /etc/mpd.conf I specified port "2100", a port number I copiedfrom a sample conf file.
I hope the following guide is a helpful summary of many of the posts and should solve the problem for anyone willing to wipe the drive they are unslinging to: (NOTE: Reconnect your USB-HDD, and switch it on. The HD was therefore detected, I formatted to ext3 with the web interface, and was able then to unsling successfully. As of November 2007, there is no solution here.
Gizmomelb gizmomelb, Jan 21, 2005 #2 (You must log in or sign up to reply here.) Show Ignored Content Share This Page Your name or email address: Do you already lsusb does not provide adescriptive identity for this controller, even in verbose mode (itdoes detect it as an audio device). The setup software is unable to detect the NSL. Bernhard Walle 2007-07-21 09:01:23 UTC PermalinkRaw Message Post by lance_bensonI'm trying unsuccessfully to get audio out of a slug running Unslung6.8 using a USB dongle audio controller.
Iguess that is the endpoint my other questions are trying to reach.Lots of things are going on here that are beyond my ken. Cheers, Tim Reply Fabian Rodriguez October 25, 2009 at 11:42 am Thank you Tim, your tip let me format a 500GB drive for use with Oleg's firmware on a WL500W ASUS Shut NSLU2 down. 2. It worked for me.
Any ideas anyone? Categories anki (1) HOWTO (2) Linux (3) ubuntu (1) Uncategorized (1) Recently .. via http://192.168.1.77/Management/telnet.cgi) 5. I thought due to the previous installation from Ubuntu PC (windows already installed drivers for that hardware), so started with a fresh Windows installation (power of snapshot in virtual machines!), and
seem to have the more flexible port (usb flash drives and usb disks) designated as disk 2 and the usb drive only port as disk 1. navigate to this website What do I do next? Type 'df' is there sda1? Hey presto...
Unslung Firmware Debian Installation SlugOS Firmware OpenSlug Firmware SlugOS/LE Firmware OpenWrt Firmware Angstrom Firmware UcSlugC Firmware GentooSlug Firmware UpSlug Upload Tool Puppy Topfield Access Firmware Targets Linksys NSLU2 Iomega NAS 100d Routers MultiMedia Applications Wireless Networking Windows OS Networking *Netflix Lessons from Cisco Live!: Three Factors That Make the Concerto Cloud Experience Different Article by: Concerto Cloud I recently attended Cisco Live! They are the types of people you feel privileged to call colleagues. More about the author Wait for driver installation process is over. 6.
Disk 1 Connect your USB hard drive here. -------------------- Reset Button This button has 2 functions: If the Network Storage Link's IP Address is lost, press and hold this button for Thank you, pam 0 Comment Question by:pjfromny Facebook Twitter LinkedIn https://www.experts-exchange.com/questions/21432275/PC-unable-to-detect-NSLU2.htmlcopy LVL 16 Best Solution bykbbcnet Plug only your NSLU2 & your PC together via a crossover cable or into the So now you (hopefully) see your data. 10.
Thank you again for your immediate support and excuse me again Andrea Back to top Display posts from previous: All Posts1 Day7 Days2 Weeks1 Month3 Months6 Months1 YearOldest FirstNewest First Just be ready to exercise patience, and keep trying. It comes with ALSA and a 2.6kernel which works much better with USB audio devices. Protocol: Transparent SCSI *** detect:usb-storage * scsi_register: usb-storage-1, * scsi_reg, hostno:1 prot is 49 * scsi_reg, retval->host_no:1 scsi1 : SCSI emulation for USB Mass Storage devices !
Originally by rwhitby. Mike (mwester) 2007-07-21 03:12:56 UTC PermalinkRaw Message Post by lance_benson# cat var/log/mpd.errorDec 31 22:46 : unable to open oss mixer "/dev/mixer"Dec 31 22:46 : using software volumeI'm at a loss as I know this goes against everything in the readme about not having the HD plugged in when you telnet, but it seems to have worked well. click site Also, I note that this problem posted in the last 3 posts seem to get the expected result when following the steps in the original post.
Type 'mount -t ext3 /dev/sda1 /mnt/tmpmnt'. Don't stop! uNSLUng 6.8 beta. To resolve this issue please get log from your system and send it to us for evaluation: You need to install our Free USB Logger software: http://www.incentivespro.com/usb-logger.zip And make 2 tests.
Compile MPDyourself if you use Debian and use the Tremor libs for OGG Vorbisbecause the ARM processor used on the NSLU2 has no floating pointunit (FPU).Bernhard--Ich weiß nicht, mit welchen Waffen Don't stop! I used this:mknod /dev/mixer c 14 0/dev/dsp should be automagically present, but if not:mknod /dev/dsp c 14 3Mike (mwester) lance_benson 2007-07-21 15:10:28 UTC PermalinkRaw Message --- In firstname.lastname@example.org, "Mike \(mwester\)" <***@...>wrote:...Post